DVC1970
07-26-2008, 10:24 AM
LIST:
76 500 block drilled for 96cc heads, ready for assembly (including stand)
1 Freshly machined 96cc heads (1 is already installed on the block, other in picture, tapped for treaded water)
1 used MTS waterpump with high flow
70 500 block with thrown rod
1 FWD set of exaust manifolds
1 RWD set of exaust manifolds
1 new Cam with new lifters (Ebay Crane knock off, middle of 3 options)
1 set of stock push rods new
1 Set of 850 heads
1 set of 950 heads
1 complete EFI setup (there are 2 in the pictures, I will be keeping the painted setup)
1 stock Non EGR intake manifold
1 Rear sump pan
1 Front sump pan
Spark plugs new in package see picture (13 packages)
Gasket set sealed on both sides.
Partial gasket set
1966 TH400 Switch Pitch with torque converter from Electra 225
425 Radiator, had no holes when pulled
Lots and Lots and Lots of other used stuff in the pictures
-Put it this way, I am keeping 1 complete EFI setup, A POSI rear-end, and Switch pitch front pump assembly. Everything else I can find goes. Bring a truck, I have a Hoist, Ill help you load it. And yes the containers go with the stuff.
Tampa FL $1250 takes it all, I will not part. If I had the time, I would be playing, not selling out.
http://www.benjaminsingh.com/sell/
76 500 block drilled for 96cc heads, ready for assembly (including stand)
1 Freshly machined 96cc heads (1 is already installed on the block, other in picture, tapped for treaded water)
1 used MTS waterpump with high flow
70 500 block with thrown rod
1 FWD set of exaust manifolds
1 RWD set of exaust manifolds
1 new Cam with new lifters (Ebay Crane knock off, middle of 3 options)
1 set of stock push rods new
1 Set of 850 heads
1 set of 950 heads
1 complete EFI setup (there are 2 in the pictures, I will be keeping the painted setup)
1 stock Non EGR intake manifold
1 Rear sump pan
1 Front sump pan
Spark plugs new in package see picture (13 packages)
Gasket set sealed on both sides.
Partial gasket set
1966 TH400 Switch Pitch with torque converter from Electra 225
425 Radiator, had no holes when pulled
Lots and Lots and Lots of other used stuff in the pictures
-Put it this way, I am keeping 1 complete EFI setup, A POSI rear-end, and Switch pitch front pump assembly. Everything else I can find goes. Bring a truck, I have a Hoist, Ill help you load it. And yes the containers go with the stuff.
Tampa FL $1250 takes it all, I will not part. If I had the time, I would be playing, not selling out.
http://www.benjaminsingh.com/sell/