Lil'John
11-20-2008, 06:56 PM
Title sort of states it.
This is NOT a junkyard engine and tranny. It has been gone through although it was last fired up to break it in about 3-4 years ago. It is bored .030" over. Just a basic rebuild. If you think a part is exceptional, it probably isn't herehttp://www.pirate4x4.com/forum/images/smilies/shaking.gif It does come with a 368 oil pan as you see in the picture.
The tranny was gone through with a rebuild kit and currently sits with an NP203 output shaft. I am currently looking for a 2wd replacement shaft/housing. I will be pulling the NP203 output shaft before sale.
The engine comes with one alternator(pictures show two). It comes with the manifolds shown in the pictures. It doesn't have a carb or a distributor(one is shown in the picture but it is a EFI version).
Engine and tranny w/o output shaft will be $1000. I've also got some Sanderson headers available for $400. I do have a Chevy 454 TBI unit that I could include for $250(this is an almost complete "kit" with wiring for TH400, ECM, etc).
The engine is located in Gilroy, CA but with a deposit, I could arrange possible delivery between Gilroy and Sacramento. I can arrange an engine hoist in Gilroy. Shipping is not an option.
I am selling it because the pictured project got abandoned *sad*
Some pictures(first two are build up pictures from a while ago.. the later rocker/crank pictures are about one month old):
http://www.pirate4x4.com/forum/attachment.php?attachmentid=278718&stc=1&d=1166903207
http://www.pirate4x4.com/forum/attachment.php?attachmentid=279000&stc=1&d=1167075552
http://www.pirate4x4.com/forum/attachment.php?attachmentid=392166&stc=1&d=1221940235
This is NOT a junkyard engine and tranny. It has been gone through although it was last fired up to break it in about 3-4 years ago. It is bored .030" over. Just a basic rebuild. If you think a part is exceptional, it probably isn't herehttp://www.pirate4x4.com/forum/images/smilies/shaking.gif It does come with a 368 oil pan as you see in the picture.
The tranny was gone through with a rebuild kit and currently sits with an NP203 output shaft. I am currently looking for a 2wd replacement shaft/housing. I will be pulling the NP203 output shaft before sale.
The engine comes with one alternator(pictures show two). It comes with the manifolds shown in the pictures. It doesn't have a carb or a distributor(one is shown in the picture but it is a EFI version).
Engine and tranny w/o output shaft will be $1000. I've also got some Sanderson headers available for $400. I do have a Chevy 454 TBI unit that I could include for $250(this is an almost complete "kit" with wiring for TH400, ECM, etc).
The engine is located in Gilroy, CA but with a deposit, I could arrange possible delivery between Gilroy and Sacramento. I can arrange an engine hoist in Gilroy. Shipping is not an option.
I am selling it because the pictured project got abandoned *sad*
Some pictures(first two are build up pictures from a while ago.. the later rocker/crank pictures are about one month old):
http://www.pirate4x4.com/forum/attachment.php?attachmentid=278718&stc=1&d=1166903207
http://www.pirate4x4.com/forum/attachment.php?attachmentid=279000&stc=1&d=1167075552
http://www.pirate4x4.com/forum/attachment.php?attachmentid=392166&stc=1&d=1221940235